Handling a Hot Water System Breakdown: Proven Strategies

Book Now

Just how do you feel about No Hot Water — Water Heater Repair?



Numerous modern houses take advantage of an electric hot water heater for their heating unit, due to its benefit and convenience of use. However, just like any other electric appliances, issues may develop with its usage, suddenly. It can be really irritating to wake up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient or perhaps also warm. Whatever the situation might be, water heater troubles can be rather nerve-racking. Fortunately, we have actually made a listing of possible remedies to your hot water heater concerns. There are a variety of factors that could cause a number of these issues, it could be a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the main power supply for safety and security. Whatever the issue is, getting it dealt with must not posture way too much of a problem if you adhere to these steps:

Examine Your Power Supply:


As fundamental as this might seem, it is really required. Without adequate power, your water heater will certainly not function. So the first thing to do when your water instantly retires is to verify that it isn't a power issue. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the concern, merely turn it on and off once again. Change any type of busted or worn-out fuse. Examine the appliance with power after these modifications to see if it's currently functioning.

Check the Heating Element in the Water Heater:


If it's not a power problem, then try looking into your heating element if it is still functioning. Test each of your heating elements to make sure the trouble isn't with any of them. If any of them is damaged, change that component and then check whether the warm water is back on.

Examine Your Thermostat:


If your water heater still isn't working or the water appearing isn't warm enough, you may need to inspect the temperature settings on your top thermostat. Make certain the breaker is switched off before doing anything. Open the gain access to panel and press the red button for temperature level reset above the thermostat. This ought to aid warm the water. Transform the circuit breaker back on and examine if the issue has actually been fixed.

Call A Specialist:


If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might require to contact a professional plumber for a professional viewpoint. The trouble with your heating system could be that the hot and cold faucets have actually been switched or it may be undersized for the amount of warm water required in your house. Whatever the instance might be, a specialist plumber would certainly help fix the issue.

Final thought


Water heater problems are not constantly significant. Most of them result from small concerns like a blown fuse or damaged burner. Replacing the malfunctioning components ought to work. Nevertheless, if you are still not able to fix the trouble, give a call to your nearby plumber ahead to get it dealt with.

What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    What Would Cause My Electric Water Heater to Stop Working?

    I came across that article about How to Troubleshoot and Repair an Electric Water Heater when doing a lookup on the web. Appreciated our blog? Please share it. Let other people discover it. Thank you for your time. Kindly come by our website back soon.


    Call for peace of mind!

    Leave a Reply

    Your email address will not be published. Required fields are marked *